Run Function (Patient Monitoring) in Normal Mode
Operator's Manual 6-21
To adjust the USB storage rate, press the HOME key to display the Main screen, then perform
the following navigation bar options:
In the User configuration menu, select NEXT to scroll to USB STORAGE. Select the INCREASE and
DECREASE options to adjust the storage rate. The time scale range options are: 5, 30, and 60 sec-
onds. The default rate is 5 seconds (see section 7.3 Using the USB Port).
When finished, press the HOME key to exit the User configuration menu and return to the
Main screen.
6.5.8 Event Mark List
Note:
For quicker access to parameters on page 2 of the User configuration menu, select PREVIOUS to wrap
around from the top to bottom of page 1, then select NEXT to access page 2.
An OR event mark list, ICU event mark list, vascular event mark list or NICU event mark list may be
set for the user to mark events during the case. To determine which event mark list appears in Run
function, press the HOME key to display the Main screen, then perform the following naviga-
tion bar options:
In the User configuration menu, select NEXT to scroll to EVENT MARK LIST. Select the INCREASE
and DECREASE options to choose the appropriate list.
When finished, press the HOME key to exit the User configuration menu and return to the
Main screen. When accessing the event mark option from the Main screen, the set list should
appear.
BASELINE MENU EVENT MARK ALARM AUDIO ON/OFF NEXT MENU
OUTPUT SELECT USER CONFIGURATION TIME SCALE NEXT MENU
NEXT PREVIOUS OFF ON
NEXT PREVIOUS INCREASE DECREASE
NEXT PREVIOUS INCREASE DECREASE
BASELINE MENU EVENT MARK ALARM AUDIO ON/OFF NEXT MENU
OUTPUT SELECT USER CONFIGURATION TIME SCALE NEXT MENU
NEXT PREVIOUS OFF ON
NEXT PREVIOUS INCREASE DECREASE
NEXT PREVIOUS INCREASE DECREASE
To Next Page
Loading...
