CPI COTI - Page 99

Secon 5 - Engineer’s Program
Technical Manual
machine will remain unl it is used or the nightly reboot. When Disabled the credit will
be deleted from the machine aer a 5 minutes of inacvity.
11. Always Show Start - this needs to be set when a card system is ed which needs the
Start command to be available before inialising the reader. i.e. Always idle
12. Hide Price - this is Enabled or Disabled, you may want to Enable this if price lines are
being used or if the price is shown on a display other than the machine.
13. Currency Denominator - this is used if the value of a single unit of the local currency is
very low
5.10.1.2 Exec Coin Mechanism
If the Coin Mechanism was set to Exec Coin Mechanism these dierent opons would
become available.
1. Currency Setup - here you would choose from the list of 49 variants pre-loaded into the
machine which currency symbol should be displayed
2. Display Coin Set - this opon allows you to choose from mulple opons which coins
you would like the customer to use.
3. The opon to inform the customer that the machine accepts Card, Key, Money or
Token is also within this sub menu.
89