xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
794
the maximum user limit on
whole device in 5 minutes
When a client host
authenticated successful.
(Username: <string>, IP: <ipaddr |
ipv6address>, MAC: <macaddr>,
Port: <[unitID:] portNum>)
When a client host fails to
authenticate.
WAC unauthenticated user (User
Name: <string>, IP: <ipaddr |
ipv6address>, MAC: <macaddr>,
Port: <[unitID:]portNum>)
Warning
The authorized user
number on whole device
reaches the max user
limit.
WAC enters stop learning state. Warning per system
number on whole device
is below the max user
limit in a time
interval(interval is project
depended).
WAC recovers from stop learning
address encountered and
discarded by IP-MAC port
binding
Unauthenticated IP-MAC address
and discarded by IMPB (IP:
<ipaddr>, MAC: <macaddr>, Port
<[unitID:]portNum>)
Dynamic IMPB entry is
conflict with static ARP
Dynamic IMPB entry conflicts with
static ARP(IP: <ipaddr>, MAC:
<macaddr>, Port
<[unitID:]portNum>)
Dynamic IMPB entry is
conflict with static FDB
Dynamic IMPB entry conflicts with
static FDB(IP: <ipaddr>, MAC:
<macaddr>, Port
<[unitID:]portNum>)
Dynamic IMPB entry
conflicts with static IMPB
Dynamic IMPB entry conflicts with
static IMPB(IP: <ipaddr>, MAC:
<macaddr>, Port
<[unitID:]portNum>)
Creating IMPB entry failed
due to no ACL rule
available
Creating IMPB entry failed due to
no ACL rule being
available(IP:<ipaddr>, MAC:
<macaddr>, Port
<[unitID:]portNum>)
Warning
[Unit <unitID>,] Management IP
address was changed by
console(Username:
<username>,IP:<ipaddr>)
<ipaddr>" are XOR
shown in log string,
which means if user
login by console,
there will no IP
information for
logging.
[Unit <unitID>,] Password was
changed by console (Username:
<username>,IP:<ipaddr> )
<ipaddr>" are XOR
shown in log string,
which means if user
login by console,
there will no IP
information for
logging.