D-Link DGS-3120-48PC - Page 797

xStack
®
DGS-3120 Series Managed Switch CLI Reference Guide
793
RADIUS server.
<[unitID]portNum> (<string>)
802.1X
802.1X Authentication
failure.
802.1X Authentication failure [for
<reason> ] from (Username:
<username>, Port:
<[unitID:]portNum>, MAC:
<macaddr> )
Warning
802.1X Authentication
successful.
802.1X Authentication successful
from (Username: <username>,
Port: <[unitID:]portNum>, MAC:
<macaddr>)
Informational
MAC-based
Access
Control
A host fails to pass the
authentication
MAC-based Access Control
unauthenticated host(MAC:
<macaddr>, Port
<[unitID:]portNum>, VID: <vid>)
Critical
The authorized user
number on a port reaches
the max user limit.
Port <[unitID:]portNum> enters
MAC-based Access Control stop
learning state.
Warning
per port
The authorized user
number on a port is below
the max user limit in a
time interval(interval is
project depended).
Port <[unitID:]portNum> recovers
from MAC-based Access Control
stop learning state.
Warning
per port
The authorized user
number on whole device
reaches the max user
limit.
MAC-based Access Control enters
stop learning state.
Warning per system
The authorized user
number on whole device
is below the max user
limit in a time
interval(interval is project
depended).
MAC-based Access Control
recovers from stop learning state.
Warning
per system
A host passes the
authentication
MAC-based Access Control host
login successful (MAC:
<macaddr>, port:
<[unitID]portNum>, VID: <vid>)
Informational
A host is aged out
MAC-based Access Control host
aged out (MAC: <macaddr>, port:
<[unitID]portNum>, VID: <vid>)
Informational
JWAC
When a client host
authenticated successful.
JWAC authenticated user
(Username: <string>, IP: <ipaddr |
ipv6address>, MAC: <macaddr>,
Port: <[unitID:] portNum>)
Informational
When a client host fails to
authenticate.
JWAC unauthenticated user (User
Name: <string>, IP: <ipaddr |
ipv6address>, MAC: <macaddr>,
Port: <[unitID:]portNum>)
Warning
This log will be triggered
when the number of
authorized users reaches
the maximum user limit on
the whole device.
JWAC enters stop learning state.
Warning
per system
This log will be triggered
when the number of
authorized users is below
JWAC recovers from stop learning
state.
Warning
per system