Linea Lite GigE Series Camera Operational Reference • 111
GigE Vision Action Command Reference
An Action Command is a single Broadcast packet sent from the Host Software application to all
cameras connected on the same network. How cameras act on an Action Command depends on its
designed feature support. Cameras receiving the Action Command broadcast may have one or
multiple functions acting on that received command.
The GigE Vision® specification defines the Action Command mechanism, which applications can
use to trigger or even schedule various actions on one or more target devices. GigE Vision
compliant cameras can take advantage of this mechanism and be triggered using a broadcast
command over a subnetwork.Please refer to the GigE Vision® Specification — version 2.0 RC6, for
configuration and usage details. Contact Teledyne DALSA Support
and request example code for
Action Command usage.
Features Supporting Action Command
Feature Category Feature Enum
I/O Control Trigger Selector Single Frame Trigger (Start)
MultiFrame Trigger (Start)
Trigger Source Action 1
Output Line Source
Pulse On: Action 1
Pulse On: Action 2
Counter and Timer Control Counter Start Source Action 1
Timer Start Source Action 1
Action Command Demo for GigE Vision Devices
This demo and application note explains how to use the Action Command mechanism to trigger an
action on a GigE Vision compliant device. An example program is also provided to demonstrate how
to use it.
It is available for download from the Teledyne DALSA website:
Action Command Demo for GigE Vision Devices
To Next Page
Loading...
