AGC Designer’s Reference Handbook
DEIF A/S Page 57 of 168
The selectable values and measurements are presented in the table on page 59 in this
handbook.
If the text ‘no text’ is selected in all 3 lines in a window, it will not be displayed. This is to get a
continuous displaying, if a window is not to be used.
Click here to change the configuration.
It is only possible to configure the view windows via the PC software –
configuration via the display unit is not possible.
There is a maximum of 15 configurable view windows in V1.
To Next Page
Loading...
Need help?
General
