2. Select Edit
.
• Details of the curve settings are shown on the display:
•
3. Highlight a curve setting, by pressing Up or Down .
4. Edit the highlighted setting, by pressing OK .
• If the setting is text or a value, pressing OK displays the virtual keyboard to change the setting.
◦ For example, the name of the curve:
◦
◦ To confirm the setting, select Next
.
• If the setting is a selection, pressing OK displays an available list of selection options.
◦ For example, the y-axis units:
OPERATOR'S MANUAL 4189341099G UK Page 72 of 130
To Next Page
Loading...
