•
4. To proceed to the next stage, select Next
.
•
You can now choose to do one of the following:
• Select a pre-configured curve (if available).
• Select a new custom curve.
• Select or edit an existing custom curve.
CAUTION
You can reuse any previously created custom curve on any terminal(s). However, the configuration settings are the same
across all the other I/O terminals. If you alter the settings for the curve, this will apply to all other I/O terminals where the
curve has been used.
OPERATOR'S MANUAL 4189341099G UK Page 83 of 130
To Next Page
Loading...
