Dell Networking N4000 Series User Manual

1018 Managing the MAC Address Table
Figure 30-2. Adding Static MAC Address
3 Select the interface to associate with the static address.
4 Specify the MAC address and an associated VLAN ID.
5 Click Apply .
The new static address is added to the
Static MAC Address Table , and the
device is updated.

Dell Networking N4000 Series Specifications

General

Layer	Layer 3
Switching Capacity	Up to 1.28 Tbps
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Series	N4000 Series
Stacking	Up to 12 units
Power Supply	Dual, hot-swappable
Management	Web, CLI, SNMP
Humidity	10% to 90% (non-condensing)