Dell Networking N4000 Series - Address Pool

Configuring DHCP Server and Relay Settings 1045
Deleting Excluded Addresses
To remove an excluded address:
1
Open the Network Properties page.
2 Click Delete Excluded Addresses to display the Delete Excluded
Addresses
page.
3 Select the check box next to the address or address range to delete.
Figure 32-4. Delete Excluded Addresses
4 Click Apply .
Address Pool
Use the Address Pool page to create the pools of IP addresses and other
network information that can be assigned by the server.
To display the Address Pool page, click Routing
→ IP → DHCP Server →
Address Pool in the navigation panel.