Dell Networking N4000 Series User Manual

1250 Configuring IPv6 Routing
DHCPv6 Client Parameters
Use the DHCPv6 Client Parameters page to view information about the
network information automatically assigned to an interface by the DHCPv6
server. This page displays information only if the DHCPv6 client has been
enabled on an IPv6 routing interface.
To display the page, click Routing
→ IPv6 → DHCPv6 Client > Lease
Parameters in the navigation panel.
Figure 38-6. DHCPv6 Lease Parameters

Dell Networking N4000 Series Specifications

General

Layer	Layer 3
Switching Capacity	Up to 1.28 Tbps
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Series	N4000 Series
Stacking	Up to 12 units
Power Supply	Dual, hot-swappable
Management	Web, CLI, SNMP
Humidity	10% to 90% (non-condensing)