Dell Networking N4000 Series User Manual

1366 Managing IPv4 and IPv6 Multicast
IGMP Interface Summary
Use the Interface Summary page to display IGMP routing parameters and
data. You must configure at least one IGMP router interface to access this
page.
To display the page, click IPv4 Multicast
→ IGMP → Routing Interface →
Interface Summary in the navigation panel.
Figure 43-19. IGMP Interface Summary
IGMP Cache Information
Use the Cache Information page to display cache parameters and data for an
IP multicast group address. Group membership reports must have been
received on the selected interface for data to display on the page.
To display the page, click IPv4 Multicast
→ IGMP → Routing Interface →
Cache Information in the navigation panel.

Dell Networking N4000 Series Specifications

General

Layer	Layer 3
Switching Capacity	Up to 1.28 Tbps
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Series	N4000 Series
Stacking	Up to 12 units
Power Supply	Dual, hot-swappable
Management	Web, CLI, SNMP
Humidity	10% to 90% (non-condensing)