Dell Networking N4000 Series User Manual

Monitoring and Logging System Information 249
Monitoring System Information and Configuring
Logging (Web)
This section provides information about the OpenManage Switch
Administrator pages to use to monitor system information and configure
logging on the Dell Networking N2000, N3000, and N4000 series switches.
For details about the fields on a page, click at the top of the page.
Device Information
The Device Information page displays after you successfully log on to the
switch by using the Dell OpenManage Switch Administrator. This page is a
virtual representation of the switch front panel. Use the Device Information
page to view information about the port status, or system status, and the
switch stack. Click on a port to access the Port Configuration page for the
selected port.
To display the Device Information page, click Home in the navigation panel.
Figure 11-1. Device Information
Click the Stack View link to view front panel representations for all units in
the stack.

Dell Networking N4000 Series Specifications

General

Layer	Layer 3
Switching Capacity	Up to 1.28 Tbps
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Series	N4000 Series
Stacking	Up to 12 units
Power Supply	Dual, hot-swappable
Management	Web, CLI, SNMP
Humidity	10% to 90% (non-condensing)