Dell Networking N4000 Series User Manual

Configuring IP Routing 1075
Route Entry Configuration
Use the Route Entry Configuration page to add new and configure router
routes.
To display the page, click Routing
→ Router → Route Entry Configuration
in the navigation panel.
Figure 33-9. Route Entry Configuration
Adding a Route and Configuring Route Preference
To configure routing table entries:
1
Open the Route Entry Configuration page.

Dell Networking N4000 Series Specifications

General

Layer	Layer 3
Switching Capacity	Up to 1.28 Tbps
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Series	N4000 Series
Stacking	Up to 12 units
Power Supply	Dual, hot-swappable
Management	Web, CLI, SNMP
Humidity	10% to 90% (non-condensing)