Dell Networking N4000 Series User Manual

174 Managing a Switch Stack
Figure 9-1. Connecting a Stack of Switches
The stack in Figure 9-1 has the following physical connections between the
switches:
• The lower stacking port on Unit 1 is connected to the upper stacking port
on Unit 2.
• The lower stacking port on Unit 2 is connected to the upper stacking port
on Unit 3.
• The lower stacing port on Unit 3 is connected to the upper stacking port
on Unit 1.
Dell Networking N2000, N3000, and N4000 Stacking Compatibility
Dell Networking N2000, N3000, and N4000 series switches do not stack with
different Dell Networking series switches or Dell PowerConnect series
switches. Dell Networking N2000 series switches only stack with other N2000
Unit 1
Unit 2
Unit 3

Dell Networking N4000 Series Specifications

General

Layer	Layer 3
Switching Capacity	Up to 1.28 Tbps
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Series	N4000 Series
Stacking	Up to 12 units
Power Supply	Dual, hot-swappable
Management	Web, CLI, SNMP
Humidity	10% to 90% (non-condensing)