Dell Networking N4000 Series User Manual

Managing General System Settings 305
Power Over Ethernet Interface Configuration (N2024P/N2048P and
N3024P/N3048P Only)
Use the PoE Interface Configuration page to configure the per-port PoE
settings. From this page, you can also access the PoE Counters table and PoE
Port Table. The PoE Port table allows you to view and configure PoE settings
for multiple ports on the same page.
To display the PoE Interface Configuration
page, click System → General →
Power over Ethernet
→ Interface Configuration in the navigation panel.
Figure 12-21. PoE Interface Configuration

Dell Networking N4000 Series Specifications

General

Layer	Layer 3
Switching Capacity	Up to 1.28 Tbps
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Series	N4000 Series
Stacking	Up to 12 units
Power Supply	Dual, hot-swappable
Management	Web, CLI, SNMP
Humidity	10% to 90% (non-condensing)