Dell Networking N4000 Series User Manual

Configuring Connectivity Fault Management 867
To add an MA, click the Add link at the top of the page.
Dot1ag MEP Configuration
Use the MEP Configuration page to define switch ports as Management End
Points. MEPs are configured per domain and per VLAN.
To display the
page, click Switching → Dot1ag → MEP Configuration in the
tree view.
Figure 26-7. Dot1ag MEP Configuration

Dell Networking N4000 Series Specifications

General

Layer	Layer 3
Switching Capacity	Up to 1.28 Tbps
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Series	N4000 Series
Stacking	Up to 12 units
Power Supply	Dual, hot-swappable
Management	Web, CLI, SNMP
Humidity	10% to 90% (non-condensing)