Dell Networking N4000 Series User Manual

1052 Configuring DHCP Server and Relay Settings
DHCP Server Reset Configuration
Use the Reset Configuration page to clear the client bindings for one or more
clients. You can also reset bindings for clients that have leased an IP address
that is already in use on the network.
To display the Reset Configuration page, click Routing
→ IP → DHCP
Server
→ Reset Configuration in the navigation panel.
Figure 32-12. Reset DHCP Bindings
DHCP Server Conflicts Information
Use the Conflicts Information page to view information about clients that
have leased an IP address that is already in use on the network.
To display the
Conflicts Information page, click Routing → IP → DHCP
Server
→ Conflicts Information in the navigation panel.
Figure 32-13. DHCP Server Conflicts Information

Dell Networking N4000 Series Specifications

General

Layer	Layer 3
Switching Capacity	Up to 1.28 Tbps
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Series	N4000 Series
Stacking	Up to 12 units
Power Supply	Dual, hot-swappable
Management	Web, CLI, SNMP
Humidity	10% to 90% (non-condensing)