EasyManua.ls Logo

Dell Networking N4000 Series - Page 107

Dell Networking N4000 Series
1460 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Hardware Overview 107
Figure 3-13. N3048 Mini-SAS Stacking Ports Close-up
The term mini-SAS refers to the stacking port cable connections shown in
Figure 3-13. See "Managing a Switch Stack" on page 171 for information on
using the mini-SAS ports to connect switches.
Expansion Slots for Plug-in Modules
One expansion slot is located on the back of the N3000 models and can
support the following modules:
•10GBASE-T module
•SFP+ module
Each plug-in module has two ports. The plug-in modules include hot-swap
support, so you do not need to reboot the switch after you install a new
module.
Power Supplies
N3024, N3024F and N3048
N3024 series, N3024F and N3048 switches support two 200-watt Field
Replaceable Unit (FRU) power supplies which give full power redundancy for
the switch. The N3024, N3024F, and N3048 switches offer the V-lock feature
for users desiring the need to eliminate accidental power disconnection. The
V-lock receptacle on the
Power Supply Unit (
PSU) allows for the use of a
power cord that has the V-lock feature to create an integral secure locking
connection.
Mini-SAS stacking ports

Table of Contents

Other manuals for Dell Networking N4000 Series

Related product manuals