Dell Networking N4000 Series User Manual

Monitoring and Logging System Information 261
Figure 11-14. Add Remote Log Server
5 Select the severity of the messages to send to the remote server.
6 Click Apply .
Click the Show All link to view or remove remote log servers configured on
the system.
Figure 11-15. Show All Log Servers
NOTE: When you select a severity level, all higher (numerically lower)
severity levels are automatically selected.

Dell Networking N4000 Series Specifications

General

Layer	Layer 3
Switching Capacity	Up to 1.28 Tbps
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Series	N4000 Series
Stacking	Up to 12 units
Power Supply	Dual, hot-swappable
Management	Web, CLI, SNMP
Humidity	10% to 90% (non-condensing)