Dell Networking N4000 Series User Manual

350 Configuring SNMP
snmp-server community-
group
community - string
group-name
[ipaddress
ip-address ]
Map the internal security name for SNMP v1 and SNMP
v2 security models to the group name.
• community-string — Community string that acts like a
password and permits access to the SNMP protocol
.
(Range: 1-20 characters)
•
group-name — Name of a previously defined group. The
group defines the objects available to the community.
(Range: 1-30 characters)
•
ip-address — Management station IP address. Default is
all IP addresses.
exit Exit to Privileged EXEC mode.
show snmp View SNMP settings and verify the configuration
Command Purpose

Dell Networking N4000 Series Specifications

General

Layer	Layer 3
Switching Capacity	Up to 1.28 Tbps
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Series	N4000 Series
Stacking	Up to 12 units
Power Supply	Dual, hot-swappable
Management	Web, CLI, SNMP
Humidity	10% to 90% (non-condensing)