Dell Networking N4000 Series - Page 362

362 Managing Images and Files
• N4032, N4032F, N4064, N4064F
N3000 _ N2000 — Dell Networking 2000/3000 series switch firmware for:
• N2024, N2048, N2024P, N2048P, N3024, N3024P, N3024F, N3048,
N3048P
And the version number is:
Version Numbering Convention
• Major release numbers start at 6.
• Minor release numbers start at 0.
• Maintenance release numbers start at 0.
• Build numbers start at 1.
Examples:
• N3000 _ N2000 v6.0.1.3.stk — N3000 / N2000 series switch firmware version
6.0.1.3. This is the third build for the first maintenance release for the 6.0
major release.
• N4000v6.1.0.1.stk — N4000 series switch firmware version 6.1.0.1. This is
the first build for the first minor release after the 6.0 major release, i.e.,
release 6.1.
Configuration Files
Configuration files contain the CLI commands that change the switch from
its default configuration. The switch can maintain three separate
configuration files: startup-config, running-config, and backup-config. The
switch loads the startup-config file when the switch boots. Any configuration
changes that take place after the boot process completes are written to the
Version number Description
6 0 0 1 Four part version number
Denotes the build number.
Denotes a scheduled maintenance release of the firmware.
Denotes a minor release of the firmware.
Denotes a major release of the firmware.