Dell Networking N4000 Series User Manual

434 Monitoring Switch Traffic
Adding an Alarm Table Entry
To add an alarm:
1.
Open the RMON Alarms page.
2. Click Add.
The
Add an Alarm Entry page displays.
Figure 16-21. Add an Alarm Entry
3. Complete the fields on this page as needed. Use the help menu to learn
more information about the data required for each field.
4. Click Apply .
The RMON alarm is added, and the device is updated.
To view configured alarm entries, click the Show All tab. The Alarms Table
displays. From this page, you can remove configured alarms.

Dell Networking N4000 Series Specifications

General

Layer	Layer 3
Switching Capacity	Up to 1.28 Tbps
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Series	N4000 Series
Stacking	Up to 12 units
Power Supply	Dual, hot-swappable
Management	Web, CLI, SNMP
Humidity	10% to 90% (non-condensing)