Dell Networking N4000 Series User Manual

Configuring Port Characteristics 499
interface interface Enter interface configuration mode for the specified
interface. The
interface variable includes the interface type
and number, for example gigabitethernet 1/0/3.
You can also specify a range of interfaces with the interface
range command, for example, interface range
gigabitethernet 1/0/8-12 configures interfaces 8, 9, 10, 11,
and 12.
green-mode energy-
detect
Enable energy-detect mode on the interface.
green-mode eee Enable EEE low power idle mode on the interface.
exit Exit to global configuration mode.
green-mode eee-lpi-
history {sampling-
interval
seconds | max-
samples
max }
Configure the global EEE LPI history collection interval
and buffer size.
exit Exit to Privileged EXEC mode.
show green-mode
interface
View green mode settings for the specified port.
show green-mode eee-
lpi-history interface
interface
View the EEE LPI history statistics for the specified port.
Command Purpose

Dell Networking N4000 Series Specifications

General

Layer	Layer 3
Switching Capacity	Up to 1.28 Tbps
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Series	N4000 Series
Stacking	Up to 12 units
Power Supply	Dual, hot-swappable
Management	Web, CLI, SNMP
Humidity	10% to 90% (non-condensing)