Dell Networking N4000 Series User Manual

Configuring Link Aggregation 965
VPC role....................................... Secondary
System MAC address............................. 001E.C9dE.C513
MLAG-Peer-B#show vpc statistics peer-link
Peer link control messages transmitted......... 95
Peer link control messages Tx errors........... 0
Peer link control messages Tx timeout.......... 0
Peer link control messages ACK transmitted..... 37
Peer link control messages ACK Tx errors....... 0
Peer link control messages received............ 37
Peer link data messages transmitted............ 777
Peer link data messages Tx errors.............. 0
Peer link data messages Tx timeout............. 0
Peer link data messages received............... 878
Peer link BPDU's transmitted to peer........... 2
Peer link BPDU's Tx errors..................... 0
Peer link BPDU's received from peer............ 11
Peer link BPDU's Rx errors..................... 0
Peer link LACPDU's tranmsitted to peer......... 775
Peer link LACPDU's Tx errors................... 0
Peer link LACPDU's received from peer.......... 867
Peer link LACPDU's Rx errors................... 0
MLAG-Peer-B#show vpc statistics peer-keepalive
Total transmitted.............................. 15545
Tx successful.................................. 15545
Tx errors...................................... 0
Total received................................. 15542
Rx successful.................................. 15542
Rx Errors...................................... 0
Timeout counter................................ 0

Dell Networking N4000 Series Specifications

General

Layer	Layer 3
Switching Capacity	Up to 1.28 Tbps
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Series	N4000 Series
Stacking	Up to 12 units
Power Supply	Dual, hot-swappable
Management	Web, CLI, SNMP
Humidity	10% to 90% (non-condensing)