Dell Networking N4000 Series User Manual

Configuring Link Aggregation 979
Self Role...................................... Primary
Peer Role...................................... Secondary
Peer detection................................. Peer detected, VPC
Operational
Peer-Link details
-----------------
Interface...................................... Po1
Peer link status............................... UP
Peer-link STP Mode............................. Disabled
Configured Vlans...............................
1,10,11,12,13,14,15,16,17
Egress tagging.................................
10,11,12,13,14,15,16,17
VPC Details
-----------
Number of VPCs configured...................... 2
Number of VPCs operational..................... 2
VPC id# 1
-----------
Interface...................................... Po2
Configured Vlans...............................
1,10,11,12,13,14,15,16,17
VPC Interface State............................ Active
Local MemberPorts Status
----------------- ------
Gi1/0/23 UP
Gi1/0/24 UP
Peer MemberPorts Status
---------------- ------
Gi1/0/23 UP
Gi1/0/24 UP
VPC id# 2
-----------
Interface...................................... Po3
Configured Vlans...............................
1,10,11,12,13,14,15,16,17
VPC Interface State............................ Active

Dell Networking N4000 Series Specifications

General

Layer	Layer 3
Switching Capacity	Up to 1.28 Tbps
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Series	N4000 Series
Stacking	Up to 12 units
Power Supply	Dual, hot-swappable
Management	Web, CLI, SNMP
Humidity	10% to 90% (non-condensing)