EasyManuals Logo

Dell S4820T User Manual

Dell S4820T
1178 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1009 background imageLoading...
Page #1009 background image
– offset: (OPTIONAL) enter the number of minutes to add during the summer-time period. The
range is from 1 to1440. The default is 60 minutes.
Example of the clock summer-time Command
Dell(conf)#clock summer-time pacific date Mar 14 2009 00:00 Nov 7 2009 00:00
Dell(conf)#02:02:13: %RPM0-P:CP %CLOCK-6-TIME CHANGE: Summertime configuration
changed from
"none" to "Summer time starts 00:00:00 Pacific Sat Mar 14 2009;Summer time ends
00:00:00 pacific
Sat Nov 7 2009"
Setting Recurring Daylight Saving Time
Set a date (and time zone) on which to convert the switch to daylight saving time on a specific day every
year.
If you have already set daylight saving for a one-time setting, you can set that date and time as the
recurring setting with the
clock summer-time time-zone recurring command.
To set a recurring daylight saving time, use the following command.
• Set the clock to the appropriate timezone and adjust to daylight saving time every year.
CONFIGURATION mode
clock summer-time time-zone recurring start-week start-day start-month start-
time end-week end-day end-month end-time [offset]
– time-zone: Enter the three-letter name for the time zone. This name displays in the show clock
output.
– start-week: (OPTIONAL) Enter one of the following as the week that daylight saving begins and
then enter values for start-day through end-time:
* week-number: Enter a number from 1 to 4 as the number of the week in the month to start
daylight saving time.
* first: Enter the keyword first to start daylight saving time in the first week of the month.
* last: Enter the keyword last to start daylight saving time in the last week of the month.
– start-month: Enter the name of one of the 12 months in English. You can enter the name of a
day to change the order of the display to time day month year.
– start-day: Enter the number of the day. The range is from 1 to 31. You can enter the name of a
month to change the order of the display to time day month year.
– start-year: Enter a four-digit number as the year. The range is from 1993 to 2035.
– start-time: Enter the time in hours:minutes. For the hour variable, use the 24-hour format;
example, 17:15 is 5:15 pm.
– end-week: If you entered a start-week, enter the one of the following as the week that daylight
saving ends:
* week-number: Enter a number from 1 to 4 as the number of the week in the month to start
daylight saving time.
* first: Enter the keyword first to start daylight saving time in the first week of the month.
* last: Enter the keyword last to start daylight saving time in the last week of the month.
– end-month: Enter the name of one of the 12 months in English. You can enter the name of a day
to change the order of the display to time day month year.
– end-day: Enter the number of the day. The range is from 1 to 31. You can enter the name of a
month to change the order of the display to
time day month year.
System Time and Date
1009

Table of Contents

Other manuals for Dell S4820T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell S4820T and is the answer not in the manual?

Dell S4820T Specifications

General IconGeneral
BrandDell
ModelS4820T
CategorySwitch
LanguageEnglish

Related product manuals