Dell S4820T - Dataplane Statistics

TX Err PKT Counter : 0
--- Error counters---
Internal Mac Transmit Errors : 0
Unknown Opcodes : 0
Internal Mac Receive Errors : 0
Dataplane Statistics
The show hardware stack-unit cpu data-plane statistics command provides insight into
the packet types coming to the CPU. The show hardware stack-unit cpu party-bus
statistics command displays input and output statistics on the party bus, which carries inter-process
communication traffic between CPUs.
The command output in the following example has been augmented, providing detailed RX/ TX packet
statistics on a per-queue basis. The objective is to see whether CPU-bound traffic is internal (so-called
party bus or IPC traffic) or network control traffic, which the CPU must process.
Example of Viewing Dataplane Statistics
Dell#show hardware stack-unit 2 cpu data-plane statistics
bc pci driver statistics for device:
rxHandle :0
noMhdr :0
noMbuf :0
noClus :0
recvd :0
dropped :0
recvToNet :0
rxError :0
rxDatapathErr :0
rxPkt(COS0) :0
rxPkt(COS1) :0
rxPkt(COS2) :0
rxPkt(COS3) :0
rxPkt(COS4) :0
rxPkt(COS5) :0
rxPkt(COS6) :0
rxPkt(COS7) :0
rxPkt(UNIT0) :0
rxPkt(UNIT1) :0
rxPkt(UNIT2) :0
rxPkt(UNIT3) :0
transmitted :0
txRequested :0
noTxDesc :0
txError :0
txReqTooLarge :0
txInternalError :0
txDatapathErr :0
txPkt(COS0) :0
txPkt(COS1) :0
txPkt(COS2) :0
txPkt(COS3) :0
txPkt(COS4) :0
txPkt(COS5) :0
txPkt(COS6) :0
txPkt(COS7) :0
txPkt(UNIT0) :0
S-Series Debugging and Diagnostics
1157