Dell S4820T - Configuring the SSH Server Cipher List

hmac-algorithm: Enter a space-delimited list of keyed-hash message authentication code (HMAC)
algorithms supported by the SSH server.
The following HMAC algorithms are available:
• hmac-md5
• hmac-md5-96
• hmac-sha1
• hmac-sha1-96
• hmac-sha2-256
• hmac-sha2-256-96
The default HMAC algorithms are the following:
• hmac-md5
• hmac-md5-96
• hmac-sha1
• hmac-sha1-96
• hmac-sha2-256
• hmac-sha2-256-96
When FIPS is enabled, the default HMAC algorithm is hmac-sha1-96.
Example of Configuring a HMAC Algorithm
The following example shows you how to configure a HMAC algorithm list.
Dell(conf)# ip ssh server mac hmac-sha1-96
Configuring the SSH Server Cipher List
To configure the cipher list supported by the SSH server, use the ip ssh server cipher cipher-list
command in CONFIGURATION mode.
cipher-list-: Enter a space-delimited list of ciphers the SSH server will support.
The following ciphers are available.
• 3des-cbc
• aes128-cbc
• aes192-cbc
• aes256-cbc
• aes128-ctr
• aes192-ctr
• aes256-ctr
The default cipher list is 3des-cbc,aes128-cbc,aes192-cbc,aes256-cbc,aes128-ctr,aes192-ctr,aes256-ctr
878
Security