Dell S4820T - Copying Configuration Files Via SNMP; Copying the Startup-Config Files to the Running-Config

• the server OS is UNIX
• you are using SNMP version 2c
• the community name is public
• the file f10-copy-config.mib is in the current directory or in the snmpset tool path
Copying Configuration Files via SNMP
To copy the running-config to the startup-config from the UNIX machine, use the following command.
• Copy the running-config to the startup-config from the UNIX machine.
snmpset -v 2c -c public force10system-ip-address copySrcFileType.index i 2
copyDestFileType.index i 3
Examples of Copying Configuration Files
The following examples show the command syntax using MIB object names and the same command
using the object OIDs. In both cases, a unique index number follows the object.
The following example shows copying configuration files using MIB object names.
> snmpset -v 2c -r 0 -t 60 -c private -m ./f10-copy-config.mib 10.10.10.10
copySrcFileType.101
i 2 copyDestFileType.101 i 3
FTOS-COPY-CONFIG-MIB::copySrcFileType.101 = INTEGER: runningConfig(2)
FTOS-COPY-CONFIG-MIB::copyDestFileType.101 = INTEGER: startupConfig(3)
The following example shows copying configuration files using OIDs.
> snmpset -v 2c -c public -m ./f10-copy-config.mib 10.10.10.10
.1.3.6.1.4.1.6027.3.5.1.1.1.1.2.100 i 2 .1.3.6.1.4.1.6027.3.5.1.1.1.1.5.100 i 3
FTOS-COPY-CONFIG-MIB::copySrcFileType.100 = INTEGER: runningConfig(2)
FTOS-COPY-CONFIG-MIB::copyDestFileType.100 = INTEGER: startupConfig(3)
Copying the Startup-Config Files to the Running-Config
To copy the startup-config to the running-config from a UNIX machine, use the following command.
• Copy the startup-config to the running-config from a UNIX machine.
snmpset -c private -v 2c force10system-ip-address copySrcFileType.index i 3
copyDestFileType.index i 2
Examples of Copying Configuration Files from a UNIX Machine
The following example shows how to copy configuration files from a UNIX machine using the object
name.
> snmpset -c public -v 2c -m ./f10-copy-config.mib 10.11.131.162
copySrcFileType.7 i 3
copyDestFileType.7 i 2
FTOS-COPY-CONFIG-MIB::copySrcFileType.7 = INTEGER: runningConfig(3)
FTOS-COPY-CONFIG-MIB::copyDestFileType.7 = INTEGER: startupConfig(2)
The following example shows how to copy configuration files from a UNIX machine using OID.
>snmpset -c public -v 2c 10.11.131.162 .1.3.6.1.4.1.6027.3.5.1.1.1.1.2.8 i 3
.1.3.6.1.4.1.6027.3.5.1.1.1.1.5.8 i 2
Simple Network Management Protocol (SNMP)
939