• FIPS mode disables.
• The SSH server re-enables.
• The Telnet server re-enables (if it is present in the configuration).
• New 1024–bit RSA and RSA1 host key-pairs are created.
To disable FIPS mode, use the following command.
• To disable FIPS mode from a console port.
CONFIGURATION mode
no fips mode enable
The following Warning message displays:
WARNING: Disabling FIPS mode will close all SSH/Telnet connections, restart
those servers, and destroy
all configured host keys.
Proceed (y/n) ?
380
FIPS Cryptography
To Next Page
Loading...
