Delta DPS-400K - General Overview; Package Inspection

2-2
Ultron DPS Series
2.1 General Overview
The DPS series UPS, a three-phase four-wire on-line uninterruptible power supply, is a
dedicated design for large scale power systems such as data centers, communication
systems, network rooms, emergency systems and factory facilities. The unit adopts
advanced IGBT technology to provide perfect, clean, pure sine waves and high-quality
RXWSXWSRZHUWRWKHFULWLFDOORDGVFRQQHFWHG,WIHDWXUHVKLJKHI¿FLHQF\ORZKHDWJHQHUDWLRQ
low noise, and high reliability.
Using the RS-232 port, you can connect the UPS to a PC to monitor relevant issues. With
the installation of the included software CD-UPSentry 2012, you can monitor several UPSs
placed in a computer room or a factory to facilitate centralized control. Besides, you can
parallel at maximum eight UPS units without using any external parallel card to increase the
system capacity and redundancy and enhance the unit’s availability and reliability.
2.2 Package Inspection
y
External
During UPS transportation, some unpredictable situations might occur. It is recom-
mended that you inspect the UPS exterior packaging. If you notice any damage, please
immediately contact the dealer from whom you purchased the unit.
y
Internal
1. Check the rating label attached to the UPS and make sure the device No. and
capacity match what you ordered.
2. Examine if any parts are loose or damaged.
3. The UPS package contains the following items. Please check if any items are
missing.
C x 2
A x 2
B x 2
1 2
3
4
5
6
7
8 9
10
11