Develop ineo+ 25 - Page 142

About Duplex Printing3-28
In addition, if [Print Type] has been set to [Booklet], autoduplex printing is
performed.
The following order settings are available when [Booklet] is selected.
1 Load plain paper into the tray.
2 From the printer driver, specify duplex (double-sided) printing ([Layout]
tab in Windows).
3 Click [OK].
d With autoduplexing, the back side is printed first, and then the
front side is printed.
If [Short Edge (Bottom)] is selected, the pages will be laid
out to flip at the bottom.
If [Left Binding] is selected, the pages can be folded as a
left-bound booklet.
If [Right Binding] is selected, the pages can be folded as a
right-bound booklet.
1
3
1
2
1
1
1
2
3
3
3
1
1
2