Develop ineo+ 25 - Saving Data on a USB Memory Device (Scan to USB Memory)

Scanning With the Machine 7-11
3 Follow the instructions that appear on the computer screen.
d The scan data is saved in the folder specified with LinkMagic. For
details, refer to the [Reference Guide] on the Documentation CD/
DVD.
Saving Data on a USB Memory Device (Scan to USB
Memory)
Follow the procedure described below to save scan data to a USB memory
device plugged into the USB HOST port of this machine.
d This machine is compatible with a USB memory device of 4 GB or
less.
1 Plug the USB memory device into the USB HOST port of this machine.
2 In the main screen (Scan mode), press the + or , key to select [SCAN
TO], and then press the Select key.
3 Press the + or , key to select [SCAN TO USB MEMORY], and then press
the Select key.
d Depending on the USB memory device that is used, it may take some
time for the scan data to be transferred.