Media Storage3-30
Media Storage
- Keep media on a flat, level surface in its original wrapper until it is time to
load it.
Media that has been stored for a long time out of its packaging may dry
up too much and cause misfeeding.
- If media has been removed from its wrapper, place it in its original pack-
aging and store in a cool, dark place on a level surface.
- Avoid moisture, excessive humidity, direct sunlight, excessive heat
(above 35°C [95°F]), and dust
- Avoid leaning against other objects or placing it in an upright position.
Before using stored media, do a trial print and check print quality.
To Next Page
Loading...
