EasyManua.ls Logo

Develop ineo+ 25 - Registering;Editing Addresses; Registering in the Favorite List

Develop ineo+ 25
340 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Scanning With the Machine7-20
Registering/Editing Addresses
Addresses can be registered/edited in the favorite list, as speed dial destina-
tions or as group dial destinations.
d
Addresses can also be registered/edited with Web Connection or with
LSU (Local Setup Utility) on the enclosed Applications CD/DVD. For
details, refer to the [Reference Guide] on the Documentation CD/
DVD.
d
The same settings menu used to register/edit fax numbers is used to
register/edit addresses. For details on registering/editing fax num-
bers, refer to the [Facsimile User’s Guide] on the Documentation CD/
DVD.
Registering in the Favorite List
From the speed dial destinations and group dial destinations registered on
this machine, register a maximum of 20 destinations in the favorite list for
convenient access to frequently specified destinations. Follow the procedure
described below to register an address (e-mail address, FTP address or
SMB address) on the favorite list.
1 In the main screen (Scan mode), press the + or , key to select [UTILITY],
and then press the Select key.
2 Press the + or , key to select [DIAL REGISTER], and then press the
Select key.
3 Press the + or , key to select [FAVORITE], and then press the Select
key.
d
If data is already registered on the favorite list, continue with step
7 after completing step 3.
4 Press the Addressbook key to switch between [SPEED DIAL] and
[GROUP DIAL].
5 Use the keypad to type in the number (between 1 and 250) for the speed
dial destination or the number (between 1 and 20) for the group dial des-
tination to be registered on the favorite list, and then press the Select
key.
The information registered for the selected speed dial destination or
group dial destination appears.
6 Press the Select key again.
7 To register another address, press the + or , key to select [ADD], press
the Select key, and then repeat the procedure from step 4.
8 To finish registering addresses, press the + or , key to select [FINISH],
and then press the Select key.

Table of Contents

Other manuals for Develop ineo+ 25

Related product manuals