Develop ineo+ 25 - Printer Driver Settings; Common Buttons

Printer Driver Settings4-6
Printer Driver Settings
Common Buttons
The buttons described below appear on each tab.
- [OK]
Click to exit the Properties dialog box, saving any changes made.
- [Cancel]
Click to exit the Properties dialog box without saving any changes made.
- [Apply]
Click to save all changes without exiting the Properties dialog box.
- [Help]
Click to view the help.
- [Favorite Setting]
Click [Add] to save the current settings. Specify the following settings, and
then click [OK].
[Name]: Type in the name of the settings to be saved.
[Icon]: Select an icon from the icon list to easily identify the settings. The
selected icon appears in the drop-down list.
[Sharing]: Specify whether or not the settings to be saved can be used by
other users logged onto the computer.
[Comment]: Add a simple comment to the settings to be saved.
Afterward, the saved settings can be selected from the drop-down list. To
change the registered settings, click [Edit].
Select [Defaults] from the drop-down list to reset the functions in all tabs to
their default values.
- [Paper View]
Click the button to display a sample of the page layout in the figure area.
d This button does not appear on the [Quality] tab.
- [Printer View]
Click the button to display an image of this machine in the figure area.
- [Quality View]
Click the button to display a sample of the settings selected in the [Quality]
tab.
d This button appears only when the [Quality] tab is selected.