Entering Text 12-11
Correcting Text and Input Precautions
- To erase all entered text, hold down the Back key.
- To delete only part of the entered text, use the * and ) keys to move the
cursor (_) to the character that you want to delete, and then press the
Back key.
- If multiple characters are assigned to a single key, [OK=)] appears at the
bottom of the screen.
- If the same key is to be used to enter two characters in a row, press the
) key after selecting the first character. (Refer to the above inputting
example.)
- To enter a space, press the 0 key.
To Next Page
Loading...
