Clearing Media Misfeeds10-6
Clearing Media Misfeeds
To avoid damage, always remove misfed media gently, without tearing it.
Any piece of media left in the machine, whether large or small, can obstruct
the media path and cause further misfeeds. Do not reload media that has
misfed.
The image is not fixed on the media before the fusing process. If you
touch the printed surface, the toner may stick to your hands, so be
careful not to touch the printed face when removing the misfed media.
Make sure not to spill any toner inside the machine.
To Next Page
Loading...
