Develop ineo+ 25 - Documents that Can be Loaded into the ADF

Original Media3-32
Documents that can be loaded into the ADF
The following types of documents can be loaded into the ADF.
Do not load the following types of documents into the ADF.
- Documents containing pages of different sizes
- Wrinkled, folded, curled, or torn documents
- Highly translucent or transparent documents, such as overhead trans-
parencies or diazo photosensitive paper
- Coated documents such as carbon-backed paper
- Documents printed on paper thicker than 110 g/m²
- Documents with pages bound together with paper clips or staples
- Documents that are bound in a book or booklet
- Documents with pages bound together with glue
- Documents with pages that have had cutouts removed or are cutouts
- Label sheets
- Offset printing masters
- Documents with binder holes
Document media type /
Weight
Plain paper / 50 to 110 g/m²
Document size Maximum size: Legal
Width: 140 to 216 mm, Length: 90 to 356 mm
Media capacity
35 sheets (media weight: 80 g/m
2
)