Scanning With the Machine7-28
Selecting the Scan Quality Setting
The resolution, scan mode and density appropriate for the scanned image
can be selected.
Selecting the Resolution
1 In the main screen (Scan mode), press the + or , key to select the cur-
rent scan quality setting, and then press the Select key.
2 Press the + or , key to select [RESOLUTION], and then press the Select
key.
3 Press the + or , key to select [150x150dpi] or [300x300dpi] and then
press the Select key.
The main screen (Scan mode) appears again.
Selecting the Scan Mode
1 In the main screen (Scan mode), press the + or , key to select the cur-
rent scan quality setting, and then press the Select key.
2 Press the + or , key to select [MODE], and then press the Select key.
3 Press the + or , key to select [MIX], [TEXT] or [PHOTO], and then press
the Select key.
The main screen (Scan mode) appears again.
Selecting the Scan Density
1 In the main screen (Scan mode), press the + or , key to select the cur-
rent scan quality setting, and then press the Select key.
2 Press the + or , key to select [DENSITY], and then press the Select key.
3 Press the * or ) key to select the desired scan density, and then press
the Select key.
As the indicator is moved to right, the density becomes darker.
To Next Page
Loading...
