Scanning From a Computer Application7-6
Macintosh TWAIN Driver Settings
- [Load]
Specify a saved settings file (dat file) for scanning.
- [Save]
Save the current settings as a settings file (dat file).
- [Default]
Return all settings to their defaults.
- Help icon
Click to display the Help.
- About icon
Click to display the software version information.
- [Paper source]
With scanning documents from the [Paper source].
- [Original Size]
Specify the document size.
- [Scan Type]
Specify the scan type.
- [Resolution]
Specify the resolution.
- [Scale]
Specify the enlargement or reduction ratio for the selected area.
d
If the resolution is set at 1200 × 1200dpi or higher, a setting larger
than 100% cannot be specified.
- Scanning mode
Select [Auto] or [Manual]. When [Manual] is selected, a tab appears so that
detailed settings can be specified, for example, for [Brightness/Contrast] and
[Filter].
d
The parameters that can be set differ depending on the scanning
mode that is selected.
d
If [Auto] is selected as the scanning mode, scanning from the original
glass is performed after a prescan is performed so that a preview
image can be checked.
To Next Page
Loading...
