Scanning With the Machine7-32
Deleting a Queued Transmission Job
The list of jobs queued for transmission can be displayed, and a job can be
deleted.
1 In the main screen (Scan mode), press the + or , key to select [CANCEL
RESERV.], and then press the Select key.
2 Press the + or , key to select the job to be deleted, and then press the
Select key.
d
To check the information for the selected job, press the
)
key.
d
If no jobs are queued for transmission, [NONE] appears.
3 Press the + or , key to select [YES], and then press the Select key.
The main screen (Scan mode) appears again.
To Next Page
Loading...
