Scanning With the Machine 7-25
Registering Group Dial Destinations
An e-mail address can be registered with a group dial destination. A maxi-
mum of 20 group dial destinations can be registered. (A maximum of 50
e-mail addresses can be registered with one group.)
d
The addresses that can be registered as group dial destinations are
limited to addresses registered as speed dial destinations or as other
group dial destinations.
1 In the main screen (Scan mode), press the + or , key to select [UTILITY],
and then press the Select key.
2 Press the + or , key to select [DIAL REGISTER], and then press the
Select key.
3 Press the + or , key to select [GROUP DIAL], and then press the Select
key.
4 Use the keypad to type in the number (between 1 and 20) for the group
dial destination, and then press the Select key.
5 Use the keypad to type in the group name, and then press the Select
key.
d
For details on entering/editing text, refer to “Entering Text” on
page 12-8.
6 Use the keypad to type in the number (between 1 and 220) for the speed
dial destination to be added to the group, and then press the Select key.
The information registered for the selected speed dial destination
appears.
7 Press the Select key again.
8 To register another speed dial destination, press the + or , key to select
[ADD], press the Select key, and then repeat the procedure from step 6.
9 To finish registering speed dial destinations, press the + or , key to
select [FINISH] and then press the Select key.
To Next Page
Loading...
