Solving Problems with Media Misfeeds10-26
Media is
misfeeding.
Envelopes are facing
the wrong way in Tray
1.
Load the envelopes in Tray 1 with the
flaps facing up.
If the flaps are on the long edge, load
the envelopes with the flap edge
toward the machine and the flap side
facing up.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
Use DEVELOP-approved media.
See “Specifications” on page 3-2.
The media feed roller
is dirty.
Clean the media feed roller.
For more details, refer to “Media Roll-
ers” on page 9-5.
Symptom Cause Solution
To Next Page
Loading...
