Solving Problems with Printing Quality10-38
If the problem is not resolved, even after all of the above have been per-
formed, contact Technical Support with the error information.
Colors are
not register-
ing properly;
colors are
mixed or
have
page-to-pag
e variation.
Gradations are not
adjusted correctly.
Set [MACHINE SETTING]/[CALIBRA-
TION] in the [UTILITY] menu to [ON],
and then perform the AIDC color cali-
bration. For details, refer to
“MACHINE SETTING Menu” on
page 2-24.
The front cover is
opened during the
calibration.
One or more of the
toner cartridges may
be defective.
Remove the toner cartridges and
check for damage. If it is damaged,
replace it.
The media is moist
from humidity.
Remove the moist media and replace
it with new, dry media.
The color
has a poor
reproduc-
tion or has
poor color
density.
One or more of the
imaging units may be
defective.
Remove the imaging units and check
for damage. If it is damaged, replace
it.
Symptom Cause Solution
To Next Page
Loading...
