Maintenance Manual D900
49-MD900EN05
104
3.10.1.4.PC receipt register
This parameter is used to select one of two types of receipt registers, which can be used to send a literal copy
of the receipt to the PC, i.e. the sales effected at the scales.
Possible values are:
‘LA’ – Sales are sent to the PC through the LA register.
‘LY’ – Sales are sent to the PC through the LY register.
‘HV’ – Sales are sent to the PC through the HV register.
‘HT’ Sales are sent to the PC through the LH register.
If fiscal mode is on, this parameter can only be set to: LY, HV or HT register.
3.10.1.5.PC Communication report
This parameter permits a series of messages to be displayed on the printer, indicating the status of different
processes that are executed in communications with the PC.
Activado
– Messages on processes related to PC communication are printed.
Desactivado
– Messages on processes related to PC communication are not printed.
These messages are created for different process such as “start and end a Start of Day”, “start and end price
sending”, “start-up scales”, etc. An example of such a message is:
The PC starts a Start of day. (PC: START 2000)
"End of Day START Msg: xx"
The PC ends a Start of Day. (PC: END 2000)
"End of Day OK Msg: xx"
The time and date that the event occurs are shown in the line above the message. The internal number of the
message sent between the PC and the scales is printed at the end of each text.
To Next Page
Loading...
