Dibal D900 Series User Manual

Manual D900 Maintenance
49-MD900EN05
47
3.2.2.Edit
This option allows to program vendors and edit all the parameters.
The procedure is:
1. Select the vendor number (it must be empty).
2. Press . The scale will show the vendor’s edition parameters
Code: It is the 5 digits code associated to the vendor.
Name: Name of the vendor with a maximum of 26 characters
Training: Enables or disables the training mode for the vendor (see 3.2.5 Training Mode)
Visible: Allows to show or hide the vendor key in the normal operation mode.
Picture: Image of the vendor
To modify a vendor, it must previously be erased and then edited with the new data.
3.2.3.Delete
To delete a vendor from a memory key, do the following:
1. Select the vendor to be deleted.
2. Press
3.2.4.Delete all vendors
To delete all the vendors simultaneously press the key .

Dibal D900 Series Specifications

General

Brand	Dibal
Model	D900 Series
Category	Scales
Language	English