Manual D900 Introduction
49-MD900EN05
7
1.6. MAINTENANCE ADVICE AND HOW TO LOOK AFTER YOUR D-900 SCALES
By following these recommendations, your scales will remain in perfect working order, thus obtaining a better
performance and a longer life.
1. Never place a weight on the scales that exceeds the maximum limit.
2. Do not place weights suddenly on the dish if they exceed a sixth of the maximum limit.
3. Do not exert sideways pressure on the plate
4. Always keep the touchscreen and plate clean. Use a dry cloth (and a suitable cleaning product) to clean
the scales.
5. Never pour or spray water on the scales. If the scales get wet, switch off the power supply
immediately.
6. Do not move the printer when it is switched on.
7. Do not modify the scales’ mechanical or electrical characteristics.
8. Clean the thermal head with the scales switched off. Do not use blades or sharp objects for this purpose.
9. Only have the scales repaired by authorized persons, with suitable training.
10. Always use original parts.
11. It is recommended to keep the scales out of direct sunlight, protected from rain; avoid excessively
humid conditions.
To Next Page
Loading...
Need help?
General
