Manual D900 Maintenance
49-MD900EN05
43
3.1.2.Edit
It is possible to edit the data of previously programmed articles. To edit an article:
4. Select the article to be edit. It will be marked
5. Press .
6. The scale will show an edition menu equivalent to the menu of article creation and the edition will
be done in the same way as the articles creation.
3.1.3.Copy
/ Paste
To copy an article the procedure is:
1. Select the existing article to be copied. It will be marked.
2. Press
.
The article will be marked in red
3. Select the new position to paste the article
4. Press . If the new position is empty the scale will ask for a code for the new article. In case
of having an article in this position, the scale will ask about the replacement of the article. If we
accept, the new article will get the code of the replaced article.
If we do not select a position and we want to copy the article in a new position, press instead
of .
3.1.4.Delete
To delete an article:
1. Select the existing article to be deleted. It will be marked.
2. Press . The article will be deleted after asking for confirmation.
Copy / Paste
To Next Page
Loading...
